How to Set up a WiFi Router to Use with Your Laptop?

If this process do not help you.Fell Free To call me on my Tollfree :- 1-800-986-6406
Visit Our Site Click Here And Get Free Diagnosis For PC or Router Problem..

In general, the process of installing a WiFi device to use with your laptop begins by connecting the router to the same computer that is attached to your broadband modem (in this example, your laptop); this allows automated configuration software to obtain the information it needs without any intermediary devices along the way.

Here is a typical setup:

1. Turn off the power to your broadband modem.
   If there isn’t an on/off switch, remove the power supply to the device.
2. Connect the power adapter to the back panel of the wireless router.
3. Plug the adapter into an AC outlet.
   Check that the power LED illuminates.
4. Connect an Ethernet cable to the broadband modem.
5. Restore the power to the modem.
6. Insert the other end of the Ethernet cable into the WAN (wide area network) port on the back panel of the wireless router.
7. Insert another Ethernet cable between LAN Port 1 (on the back panel of the wireless router) and any available Ethernet port on the NIC (network interface card) of the laptop, which you’re going to use to configure the WiFi system.
8. Shut down the laptop.
9. Restart the laptop connected to the WiFi router.
   Let Windows fully load.
10. Open your Web browser.
11. In the address bar of the browser, type the URL for the built-in setup screen of the wireless router.
    For example, type http://192.168.0.1 for most D-Link routers.